Virginia Tech® home

Pruning Peach Trees

ID

422-020 (SPES-221P)

Authors as Published

Authored by Richard P. Marini, Extension Specialist, Horticulture; Virginia Tech Reviewed by Sherif Sherif, Assistant Professor of Horticulture and Extension Specialist, Alson H. Smith, Jr. Agricultural Research and Extension Center, Virginia Tech

Annual pruning is a critical management practice for producing easily harvested, heavy crops of high quality peaches. However, pruning is not a substitute for other orchard practices such as fertilization, irrigation, and pest control. Pruning practices vary slightly in different regions of the United States, but have changed little in the East during the past 70 years. Although pruning may vary slightly for different varieties and localities, certain general practices should be followed. The successful pruner must understand the principles of plant growth, the natural growth habit of the tree, and how the tree will respond to certain types of pruning cuts. Improper pruning will reduce yield and fruit quality.

Reasons for Pruning

Annual pruning is required for the following reasons:

  • To develop a strong framework capable of supporting large crops.

  • To maintain the proper balance between vegetative growth and fruit production to obtain high yields of quality fruit each year.

  • To maintain tree height and spread.

  • To maintain an open canopy for adequate penetration of light and pesticides.

  • To remove broken or diseased limbs.

  • To maintain fruiting wood throughout the tree canopy.

  • To partially adjust the crop load before bloom to reduce the amount of fruit that must be removed by post-bloom hand-thinning.

When to Prune

Peach trees should not be pruned before February, and young trees should be pruned after mature trees. There is a great deal of research information and grower experience to indicate that pruning peach trees in the early winter can reduce their cold-hardiness. Avoid pruning within several days of predicted cold weather. During winter, pruning will reduce the cold tolerance of the tree for about two weeks. Trees that are pruned just before severe cold weather may have poor flower bud survival, dieback of one-year-old shoots, and injured bark on the trunk and major branches. Even just before bloom, when the flower buds are swollen and pink tissue is showing at the tip of the buds, pruning can make the flower buds less tolerant of frost. Pruning peach trees during bloom or shortly after bloom is not ideal, but it will not adversely affect the growth of the tree or the fruit. It is better to prune a little late than too early.

Summer topping, by mowing the tops or sides of the trees, is used by some growers to reduce pruning costs and maintain tree size. However, research results from pre-harvest summer topping indicate that there is little economic advantage compared to dormant pruning. Topping reduces pruning costs, but this advantage is offset by reduced fruit size. Furthermore, light penetration, flower bud cold-hardiness, shoot growth, and fruit color are not consistently altered by summer topping. If a peach grower wishes to reduce tree height, an inexpensive method may be to mow the tree tops immediately after harvest or during the late winter. Mechanical topping should always be followed by detailed pruning to eliminate stubs in the tree tops that produce dense foliage and shade the tree center.

Use “collar cuts”

For many years the use of “flush cuts” has been recommended for pruning fruit trees to promote rapid wound closure. Recent research results with peach and other tree species indicate that flush pruning cuts are more susceptible to disease infection than cuts in which a portion of the lateral branch remains. The “collar cut” method results in a pruning cut that leaves a raised collar of tissue at the branch junction. This method promotes rapid wound healing and reduces external dieback and disease infection (Figure 1).

Black and white close up of collar cuts
Figure 1. Use “collar cuts” for rapid wound healing rather than “flush cuts.”

Wound dressings

In the past a standard recommendation was to apply a generous coating of an approved tree wound dressing to fresh cuts, especially those larger than one inch in diameter. Theses asphalt-based coatings were believed to prevent decay-causing infection and encourage more rapid healing. Research data indicate that wound dressings currently available do little to prevent decay, and some serve as a food source for micro-organisms. As the coating dries, cracks in the wound dressing provide entry sites for fungal infection. A light coating of a wound dressing might be used for cosmetic purposes. It may also be beneficial to check the coating for cracks and reapply the material to cover cracks.

Pruning Tools

There are many pruning tools on the market. Selection of a particular tool should be based on the type of pruning cut to be made. Pruning tools are described in VCE Publication 430-455, A Guide to Successful Pruning: Pruning Basics and Tools.

Growth Habit of Peach

The successful pruner must understand how a tree grows and how it will respond to various types of pruning cuts. It is also important to observe the results of pruning. There are two types of buds on a peach tree. The terminal bud at the end of a shoot is always vegetative and produces a leafy shoot. Axillary buds develop during the summer at the bases of leaves on current season’s shoots and can be either leaf or flower buds. Peach flower buds are termed “pure” or “simple” because they contain only flower tissue. A peach flower bud produces a single flower that can set one fruit.

Each node (the point on the shoot where a leaf is attached) on a vegetative shoot may have from zero to 3 buds. Nodes at the terminal end of a shoot usually have single buds. The small, pointed buds are vegetative and the larger, rounder, and more hairy buds are flower buds. Many of the nodes on the lower two-thirds of a shoot have 2 or 3 buds arranged side by side. There can be any combination of flower (F) and leaf (L) buds (FL, FF, FLF, FFF), but most often a leaf bud is flanked by flower buds (FLF).

The number and distribution of flower buds on a shoot can vary with tree vigor, the variety, and the light environment that the shoot developed in. Results from a variety trial in New Jersey indicate that ‘Jerseyglo’ and ‘Springold’ had 20 to 23 flower buds per foot of shoot length, whereas ‘Harken’ and ‘Emery’ averaged only 15 flower buds per foot of shoot length. Shoots that grow less than 6 inches generally have the most fruit buds per inch of growth. The total number of fruit buds per shoot increases as the shoot’s growth increases to about 2 feet.

illustration of three branches with buds
Figure 2. Short shoots less than 8 inches long have a high density of fruit buds, but produce small fruits (A), Shoots 12 to 24 inches long (B) are most productive. Long shoots that are branched (C) produce fewer flower buds.

Moderately vigorous shoots have a high proportion of nodes with 2 flower buds. The leaf buds at most nodes develop into lateral shoots that may be fruitful in subsequent years. A number of axillary buds on vigorous current season’s shoots (greater than 2 feet long) grow to produce secondary shoots. Such shoots are not very fruitful because fruit buds do not develop at many nodes on secondary shoots.

The ideal fruiting shoot is 12 to 24 inches long and 3/16 to 1/4 inch thick at its base, and it has no secondary shoots (Figure 2). Proper pruning, fertilization, irrigation, and fruit thinning must be practiced to ensure enough shoot growth each year to produce adequate fruit buds for the following season.

Results from experiments in Virginia indicate that fruit size is related to shoot length (Figure 3). Short shoots tend to produce small fruit because short shoots have too few leaves to support the growth of fruit. Therefore, shoots less than 6 inches in length should be removed while pruning.

line chart
Figure. 3. Fruit size (fruit weight) increases as crop load (fruit/square centimeter of trunk cross-sectional area) declines from 10 to 2 fruit/square cm, and fruit weight increases as shoot length increases from 6 inches to 30 inches.

Peach Production Requires Light

The energy for plant growth comes from light. Leaves intercept light and the light energy is converted to chemical energy in the process of photosynthesis. The chemical energy is in the form of carbohydrates, which are transported around in the tree and used for growth. Results from shade experiments in Virginia indicate that the critical light level for flower bud development in peach is about 20% full sun (Fig. 4). For maximum flower bud development, shoots must be exposed to light during June and early July. High light levels during late July, August and September will not influence flower bud formation. In other experiments, shoots developing in 20% full sun at the tree interior produced only half as many flowers per foot of shoot length as shoots developing at the tree periphery that receive more than 70% full sun. Shoots developing in shaded regions of the tree also tend to die during the season and sometimes during the winter. When the center of a peach tree is opened by pruning to admit more sunlight, the outer shell of foliage 3 to 4 feet deep around the tree receives more than 30% full sun (Figure 5). Annual pruning improves light distribution throughout the tree, which is necessary for the development of flower buds and fruit. To produce large, well-colored fruit, with high sugar levels, all regions of the tree must receive at least 25% full sun.

line chart
Figure 4. Flower density (flowers per meter of shoot length) of ‘Redhaven’ peach shoots as influenced by light levels (percent full sun) during four periods of the growing season in Virginia. Light from July 31 to Sept. 30 did not influence flowering.
Chart about light distribution in a peach tree
Figure 5. Light distribution in an open-center peach tree showing 3 zones of light (% full sun).

Pruning to Obtain the Open-center Tree

Peaches are typically pruned to an open-center, or vase, shape. Peach trees are easily trained to this form and this shape allows relatively good light penetration throughout the tree. The resulting low, spreading form also facilitates thinning, pruning, and harvest from the ground. Young peach trees must be pruned carefully to develop and maintain fruiting wood near the tree center. The fruiting surface of poorly pruned trees will move farther from the tree center each year, which results in reduced yields and increased production costs. Although pruning may vary depending on the specific objectives of individual peach producers, the following guidelines can be followed to develop the low, spreading, open-center tree form.

A mature peach tree trained to the open-center form actually consists of a doughnut-shaped canopy, about 5 or 6 feet in depth and about 5 or 6 feet from the inner wall to the outer wall of the canopy. This “ring” of fruit producing canopy can be located close to the ground if trees are pruned each year to minimize tree height and to encourage light penetration into the canopy. If trees are not pruned carefully, the fruiting zone will move 10 to 12 feet above ground. Such trees produce yields slightly greater than shorter trees, but tall trees are expensive to manage because ladders are required for pruning, fruit thinning, and harvest. Branches on tall trees may also have a tendency to break under the weight of a heavy crop.

There are two types of pruning cuts. “Heading” or “heading back” cuts involve shortening a limb by cutting the end off. Heading cuts remove the terminal buds that produce plant hormones that normally inhibit shoot development below the terminal bud (Figure 6). During the growing season several vegetative buds just below the heading cut will develop into vegetative shoots. Heading cuts are used to shorten branches, stiffen branches, and induce branching. Avoid using heading cuts on the tree periphery because the proliferation of vegetative shoots forms a layer of foliage that shades the tree interior. Heading cuts are most useful for inducing branching along the trunks of newly planted trees. “Bench cuts” are a special type of heading cut, and involve removing the terminal portion of a branch just above a side branch. Bench cuts are sometimes used on peach trees to develop a low spreading tree. “Thinning” cuts involve removing part of a limb at the point where it is attached to a major branch or to the trunk. Thinning cuts do not induce vegetative growth near the pruning cut and are usually preferred for minimizing tree size and for removing excess shoots.

illustration showing three type of pruning cuts
Figure 6. Heading cuts stimulate shoot development below the cut. Thinning cuts induce little vigorous shoot growth. Bench cuts may be used to produce a low and spreading growth habit.

Pruning at Planting: Peach trees are pruned at planting to balance the tree top with the small root system and also to induce branching on the trunk. Fall-planted trees should be pruned the following spring. The height of the scaffold limbs above the ground can be varied by the height of the heading cut. It is preferable to have scaffold limbs originating 20 to 24 inches above the ground to facilitate herbicide application, grass mowing, and other orchard practices.

Small trees, particularly those from southern nurseries that are “June-budded,” usually have no side branches and should be headed at 24 to 30 inches above ground. Trees that are budded in June are small because they grow for only three months. August-budded trees are larger because they grow for about five months during the season following budding. The scaffold branches will develop within 4 to 6 inches below the cut. Larger trees usually arrive from the nursery as branched whips. Since most of the side branches are weak, they should be pruned to 2 or 3 buds. Shoots often develop from these stubs and may be suitable for major scaffold limbs. Strong branches with wide crotch angles should be pruned to 6 or 7 buds and can be retained for scaffold branches. The height at which branched trees are headed depends on the size of the tree and positions of good side branches. Trees 3 to 6 feet tall can be headed at 24 to 30 inches above ground. Larger trees must usually be headed at 3 to 4 feet because low side branches on the trunks are damaged or removed for shipping.

An alternative method of heading unbranched large trees involves heading trees at 10 inches above the ground. This will allow the tree to grow a new central leader from which scaffold branches can be selected during the first winter. Preliminary research results indicate that about 10% of large trees (trees with trunks more than 3/4 inch in diameter) may not survive the severe heading, but little tree mortality has been observed with moderate size trees.

The First Summer: Pruning the first-year tree during its first summer can be an effective method of developing the tree frame. Trees should be pruned at least once and possibly two times during the summer before growth ceases. Summer pruning will reduce the amount of dormant pruning required the first winter and will direct growth into the desirable scaffold branches. During May and again in July, low shoots on the trunk should be removed to a height of 20 inches. All shoots that form angles of less than 45 degrees with the trunk should be removed. Vertical shoots that are unacceptable as scaffold branches should be removed. A spreading growth habit can be encouraged by pinching upright-growing shoots back to an outward growing bud or secondary shoot. Pinching is actually a type of bench cut. Pinching should be done in late June and/or July while shoots are actively growing.

There is a new method of pruning first-year trees that seems very promising. Do not remove the top few shoots with poor crotches. Instead, head the top several shoots by half in early June. Growth of the headed shoots is suppressed and growth of the lower shoots that have wide crotches is encouraged. The small “bush” in the tree center is removed during the winter.

The First Winter: At the end of the first season, some trees will have many desirable limbs, and others will have limbs on only one side or may have vertical growth habits and upright leaders. The first winter is the most critical time to select branches that will develop into a strong framework capable of carrying heavy crops in the future.

If trees were pruned during their first summer, very little pruning will be needed during their first winter. The trees should begin to resemble an open-vase. Remove branches on the trunk below the 20-inch height. Remove branches that form angles of less than 45 degrees with the trunk. Branches with narrow crotches are weak because bark extends into the crotch, and branches may split from the trunk. Narrow crotches are also susceptible to winter injury, cytospora canker, and borers. Unless they form a strong, wide crotch, remove 1 of any 2 limbs of equal size that tend to divide the tree and form a Y (Figure 7).

Black and white photo of crotch
Figure 7. A “V” crotch is weak and susceptible to splitting, winter injury, and canker. One branch should have been removed during the first winter to avoid the weak crotch.

Since all peach trees do not grow alike, there are at least two basic methods of developing an open-center tree that has a strong framework, and they seem to be equally effective. The most common method involves selecting 3 primary branches with wide crotch angles and that are spaced evenly around the trunk. Some trees will not have 3 acceptable limbs at the end of the first season, but excellent trees can be developed with only 2 main branches. Sometimes, 4 to 6 desirable limbs will grow at one point on the trunk. It is best to remove all but 3 of these branches because there will eventually be 3 dominant limbs and the others will be squeezed out.

Another method of developing an open center form is to head the tree at 3 to 4 feet at planting; this is often preferable with the larger nursery trees. Select 3 to 5 limbs that are distributed evenly on the trunk and spaced 4 to 6 inches apart vertically. After the first year’s growth, peach trees with 3 main branches at 24 to 30 inches above ground look quite different from those that have 4 or 5 main limbs extending to 4 feet. However, as these trees grow for several years and are trained to the open-center, they will appear much more uniform. Avoid horizontal limbs on young trees because they will bend downward with the weight of a crop and will eventually need to be removed to allow equipment to move under the tree. Watersprouts (upright shoots developing along the upper side of a branch) will also arise along the top of a horizontal limb. An angle of 40 to 50 degrees from the vertical is most desirable. Remove root suckers, downward growing shoots, and strong vertical shoots that shade the tree center. Keep the tree balanced by shortening the strongest branch. Retain as much of the tree as possible, including the smaller side shoots growing from the selected main branches. Head the scaffold limbs above an outward-growing secondary shoot to encourage a spreading growth habit.

Sometimes a tree will produce a strong shoot from the soil line and the rest of the tree is weak or dead. If the shoot originates below the bud union, it is the rootstock and the tree should be replaced. If it develops from above the bud union, it should be pruned to a strong shoot. Secondary limbs with wide crotches developing at the appropriate height on these shoots can be selected as scaffold limbs.

The Second Summer: Although it is not necessary, it is highly desirable to prune trees during the second summer to improve light penetration into the tree center. Shoots developing on the trunk below the scaffold branches should be removed in June. Remove vigorous upright shoots developing near the tree center. By late June, when secondary shoots develop on terminal shoots, the upright portion of the terminal shoot can be pinched just above an outward growing secondary shoot. This will encourage the spreading growth of the tree and direct growth into the desired secondary shoot. Summer pruning should be completed by early July.

The Second Winter: Peach trees that have grown well for two years may be 5 to 7 feet tall, 6 to 8 feet wide, and have trunks 3 to 6 inches in diameter. Such trees will also have numerous flower buds, and, if pruned moderately, may produce 20 to 40 pounds of fruit during the third summer. Excessive pruning will reduce yield the third summer. 

Each tree should have 2 or more well-spaced, scaffold branches with wide crotch angles. If this is not the case, try to select appropriate scaffold branches and remove all others. Remove all large watersprouts that tend to grow through the tree center. Scaffolds that have made less than 30 inches of growth and have several side branches should be pruned to leave 2 or 3 well-spaced side branches. Shoots developing on the lower sides of scaffold limbs should be removed. If these shoots fruit, the extra weight will pull the scaffolds down so that they interfere with herbicide application. Retain most of the other one-year growth throughout the tree.

Sometimes 2 shoots of equal size will develop near the end of a scaffold branch and will form a V crotch. Such crotches are weak, and one shoot should be eliminated. The terminal ends of scaffold branches often grow upright. In the event that a scaffold develops a vertical orientation near its tip, it may be turned out by pruning to an outward growing secondary shoot. This type of bench cut is preferably performed during the summer but can be performed during the winter.

The Third Summer: Trees develop best when low branches and watersprouts are removed in June. Upright portions of terminal shoots should be pinched just above an outward growing secondary shoot to encourage the spreading form.

The Third Winter: After the third season, peach trees are usually 6 to 9 feet tall, 7 to 9 feet wide, and have trunks 4 to 7 inches in diameter. During the fourth summer, peach trees may produce 50 to 80 pounds of fruit. Trees should be pruned the same as during the second winter to maintain a low spreading form. It is most important to remove watersprouts, low branches, and excess fruiting shoots.

Pruning Young Fruiting Trees

The objective of pruning peach trees for the first three years is primarily to grow a tree that has a strong structure capable of supporting heavy future crops. As the trees fill their allotted spaces during years 4, 5, and 6, the orchardist must encourage a transition from vegetative growth to fruit production.

After three growing seasons, a well-trained peach tree should have 3 to 5 scaffold branches with wide angles, evenly distributed around the tree. Young fruiting trees usually grow fairly vigorously and moderate corrective pruning is needed to keep their centers open and maintain the desired tree sizes. A spreading growth habit will be encouraged by the weight of fruit on the limbs and heavy pruning should not be necessary (Figure 8).

Summer pruning should be continued to eliminate vertical watersprouts and to tip upright scaffold limbs to outward growing secondary shoots (Figures 9 and 10).

Black and white photo of a peach tree without leaves
Black and white photo of a peach tree without leaves
Figure 8. A three-year-old peach tree before (a) and after (b) dormant pruning. Note the removal of upright vigorous shoots and the retention of the best fruiting shoots.
Black and white photo of a peach tree with leaves
Figure 9. A two-year-old peach tree in late June showing upright shoot growth that is shading the tree center.
Black and white photo of a peach tree with leaves
Figure 10. The same tree after summer pruning. The upright shoots in the tree center were removed and vigorous shoots were pinched back to outward-growing secondary shoots.

Remove large, branched upright watersprouts. These shoots may be 4 to 7 feet long; they are not very fruitful, and they shade the tree center. Do not head these shoots to a side shoot with flower buds because several vigorous shoots will emerge and continue to create a vigor problem. Completely remove vigorous upright shoots that have secondary branches. Retain nonbranched shoots that have flower buds. The weight of fruit will pull these shoots down and suppress their vigor.

Do not remove all fruiting shoots in the center of the tree. The most productive open-center trees are those with fruiting wood throughout the tree canopy. It is fairly easy to maintain fruiting wood inside the tree; but, once it is lost, it is difficult to re-establish. Where there is an excess of branches, remove some to permit light to reach the tree center. However, maintain a supply of shoots that have strong flower buds. A properly trained peach tree will produce 50 to 70 pounds of fruit during the fourth and fifth seasons (Figure 9).

Pruning Middle-aged Trees

A peach tree has a shell of fruit-bearing wood about 4 to 5 feet in depth. This shell may be 4 to 8 feet above ground on low trees or 7 to 11 feet on taller upright trees. Total yield is usually greater for the taller trees, but the increased cost of pruning, thinning, harvesting, and spraying tall trees will offset the increased production. Trees that are 7 to 9 feet tall have been very profitable in the East. Careful, selective pruning is required annually to maintain low, spreading trees that have much of their growth on a low, horizontal plane.

Every season, some of the smaller twigs die, especially in shaded parts of the tree. Some of the older branches also become weak and die from other causes such as canker and borers. Remove the larger dead and badly cankered branches. It is not economical to remove all small, dead twigs, but some should be removed because they can cause limb rubs, fruit punctures, and because the bases of such shoots are entry sites for canker.

Black and white photo of a peach tree without leaves
Black and white photo of a peach tree without leaves
Figure 11. A well-trained five-year-old peach tree before (a) and after (b) dormant pruning. Note the 3 wide-angled scaffold branches and the low spreading, open-center appearance. Vigorous upright shoots and low branches have been removed. Upright branches have been thinned to outward-growing shoots and only good fruiting shoots have been retained.

By the sixth year, peach trees have usually filled their allotted spaces and have attained adequate sizes for maximum fruit production. The objectives of pruning peach trees during years 6 through 10 are to maintain tree heights of 7 to 9 feet above ground and to maintain productive fruiting wood throughout each tree. The low, spreading tree form can be maintained with proper pruning and fertilization. All vigorous watersprouts that grow vertically must be removed; do not cut them to side shoots. Retain shoots that grow horizontally and 12- to 18-inch fruiting shoots regardless of their orientation. Remember that flowers and fruit are borne on wood produced the previous year. Fruit wood tends to grow farther out on the ends of branches each year. Prune each year to keep the tree within bounds and to prevent the branches from breaking. Stimulate growth of one-year fruiting wood in the tree center by thinning-out and heading-back inside branches.

As trees come into bearing, weight of fruit bends some branches toward the ground, and these limbs may not return to an orientation above the horizontal after harvest. Some limbs, especially on the lower portions of the tree, should be removed by thinning to a shoot that is oriented above the horizontal.

Some years, peach trees produce more fruiting wood than other years. Because pruning can be partially a thinning process, more wood should be removed when ample fruit buds exist, especially for varieties with small fruit. Thin-out fruiting shoots to a spacing of about 4 to 6 inches apart around the limbs. This stimulates better growth of remaining shoots, helps control production of excess fruit and the amount of fruit thinning, and improves fruit size. Also remove the 3- to 6-inch-long fruiting shoots that are mixed with the more desirable 12- to 18-inch shoots. The shorter shoots produce small fruit. A thorough pruning job requires time and labor (10 to 15 minutes per tree), but it also saves time and labor during thinning.

Watersprouts

Vigorous shoots oriented from the upper surface of limbs are called “watersprouts”. Watersprouts develop from dormant buds within the bark. If trees produce many 3- to 5-foot watersprouts, the watersprouts should be totally removed and the rest of the pruning should be more moderate to avoid excess vigor. Nitrogen fertilization should also be reduced to control tree vigor. Nonbranched watersprouts shorter than 30 inches long, or those that are oriented more than 45 degrees from vertical can be retained. When such shoots set a fruit, the weight of the fruit will pull the shoot toward the horizontal and the shoot will not become too vigorous. Vertically-oriented watersprouts longer than 30 inches, or watersprouts that are branched usually grow vigorously and should be completely removed. Such shoots usually have large diameters and will not bend with the weight of a fruit, but will create shade at the tree interior.

Pruning Older Trees

Peach trees in Virginia usually remain profitable until they are 15 to 20 years of age. As peach trees age, they become less vigorous. Good fruiting wood becomes more scarce and is often located at the ends of long, leggy limbs.

The major objective of pruning older trees is to encourage the production of good fruiting shoots. Old trees can be invigorated by cutting back into wood that is 3 or more years old. Cut to good outward-growing side limbs. Pruning to invigorate old trees will reduce the following season’s crop because much bearing surface is lost, but it is the only way to renew the tree. Increasing the nitrogen fertilizer by 10 to 20 % may also help encourage new growth.

Trees that are moderately to heavily pruned make excellent growth of new wood during the two seasons following treatment. Such severe pruning to renew old trees is profitable only in blocks where most of the trees are still present and are in reasonably good vigor. Where more than 20% of the trees are missing or are weak, renewal pruning may not be profitable. It is best to remove the old trees and replant the entire block.

Preventing Canker

Virginia peach orchards, unlike those in states to the north, are not extensively infected with cytospora canker. This disease invades tree tissues through wounds, and it can be a major contributor to the decline of peach orchards. Although canker has not been a serious problem in Virginia, winter injury resulting from unusually cold temperatures may predispose trees to infection. Several precautionary measures can be taken while pruning to minimize canker infection.

  • Do not plant new peach trees near established trees with canker.

  • Start training young trees early to prevent broken limbs as a result of poor tree structure. Broken branches are sites of Cytospora infection.

  • Remove dead twigs on scaffold limbs.

  • Use “collar cuts” rather than “flush cuts.”

  • Do not prune in rainy or misty weather.

  • Prune regularly so that large cuts will not be necessary.

  • Prune during or after bloom; actively growing trees can protect pruning cuts from infection.

  • Do not leave pruning stubs; stubs die and can harbor the disease, which may then infect healthy branches.

  • Remove or spread narrow-angled crotches since they tend to split and serve as infection sites. Remove all weak and dead wood and fruit mummies.

  • Spray newly pruned trees the same day, if possible, or before the next rain with a fungicide used to control brown rot.

  • Control insects and diseases. For pest control recommendations, see VCE Publication 456-419, Spray Bulletin for Commercial Tree Fruit Growers.

  • Control the lesser peach tree borer. This insect aids in canker expansion and death of the tree.

  • Control brown rot and remove any brown-rotted fruit from trees before cankers form on the twigs. Annual brown rot cankers may serve as infection sites for Cytospora.

  • Control the Oriental fruit moth and peach tree borer. Injuries inflicted by these insects serve as infection sites.

Pruning To Adjust Crop Load

Fruit size is negatively related to the number of fruit on a tree. Crop load is typically adjusted about 45 days after bloom by removing excess fruit and leaving fruit about 6 inches apart on a shoot. This hand-removal of fruits requires much labor and is expensive because it can require up to one man-hour per tree. Results from a recent 3-year experiment in Virginia indicate that retaining fewer shoots during pruning and leaving fruit 4 inches apart on the shoot can reduce thinning time and improve fruit size (Table 1). 

Table 1. Fruit set, the number of fruit removed at thinning, fruit harvested per tree, fruit size, and crop value can be influenced by retaining varying numbers of fruit per tree.

Shoots/tree No. of fruit set/tree No of fruit thinned/tree No. of fruit harvested/tree Avg. fruit weight (g) Crop value ($/tree)
1997
70 320 20 273 153 35
110 400 50 290 150 33
140 490 80 350 148 38
220 510 200 355 149 38
1999
70 800 260 599 136 72
100 1050 560 535 136 62
125 1400 600 570 140 73
167 1550 945 577 125 55
250 1960 1440 541 132 61

Note: In 1997 a frost during bloom reduced the crop below the desired crop load of about 450 fruit per tree. Therefore, when severe pruning is accompanied by a frost, yield and crop value can be slightly reduced. In 1999 the trees bloomed heavily and severe pruning reduced fruit set 60%, reduced thinning by about 80%, and improved fruit size and crop value.

Pruning Winter-injured Trees

Peach trees in the mid-Atlantic region are often subjected to low winter temperatures which damage the fruit buds and the tree’s woody tissue. Winter temperatures of -10 to -15°F will usually kill some or all flower buds; temperatures below -15°F may injure or kill shoots and limbs. Peach growers are generally uncertain how to prune these winter-injured trees. The severity of winter injury should be considered before pruning peach trees. When at least 20% of the flower buds remain alive, trees should be pruned normally because only about 10% of a full bloom is necessary to set a commercial crop. When less than 20% of the flower buds are alive, pruning should be modified to retain most of the fruiting shoots. Pruning should be limited to removal of vigorous upright watersprouts that increase tree height and shade the tree center.

Occasionally, a very cold winter will cause wood injury, also called “blackheart,” where the center portion of a limb is killed and discolored (Figure 12). In such cases, peach producers usually overestimate the severity of injury. Winter-injured trees usually survive. Although yield is reduced for at least one season, properly pruned winter-injured trees can be productive for many years. It is advisable to delay pruning until the extent of injury is determined, then prune cautiously.

Black and white photo of a winter-injured peach tree
Figure 12. Winter-injured peach tree showing “blackheart” and bark splitting. Such trees usually survive and grow reasonably well if pruned moderately and fertilized.

Severe dehorning consisting of heading back into wood that is three years old or older, may fatally weaken a tree or delay its return to good cropping for several years. Moderate dehorning has some value but should not be made into wood over four years of age. Light pruning soon after growth starts, in combination with nitrogen fertilizer, is most satisfactory. Injured trees are unable to utilize starch reserves in their wood and are deficient in carbohydrates until new leaves become functional. Severe pruning removes leaf buds and reduces carbohydrate production. However, if trees are not pruned, the low carbohydrate reserve is diluted to many growing points and shoot growth is weak. Therefore, winter-injured trees should receive moderate pruning. Pruning should consist primarily of removal of water sprouts.

In January 1994 peach trees in the eastern panhandle of West Virginia experienced three successive nights of low temperatures which resulted in 100% bud kill and moderate injury to woody tissue. In the spring a replicated study was established, by Dr. Stephen Miller of the USDA and Dr. Ross Byers of Virginia Tech, to determine when and how severely moderately injured trees should be pruned. They compared four levels of pruning severity at three timings (April, May, and June). The results indicate that peach trees subjected to moderate winter injury should be pruned no later than two to three weeks after bloom using a heavy level of pruning.

Trees that were dehorned, a severe form of pruning, did not recover better than trees that were less severely pruned.


Virginia Cooperative Extension materials are available for public use, reprint, or citation without further permission, provided the use includes credit to the author and to Virginia Cooperative Extension, Virginia Tech, and Virginia State University.

Virginia Cooperative Extension is a partnership of Virginia Tech, Virginia State University, the U.S. Department of Agriculture, and local governments. Its programs and employment are open to all, regardless of age, color, disability, sex (including pregnancy), gender, gender identity, gender expression, national origin, political affiliation, race, religion, sexual orientation, genetic information, military status, or any other basis protected by law

Publication Date

July 15, 2020